Àâòîð | Òåìà: ïðîäàì Ïðîäàì íîâûé ñòóäèéíûé ìóëüòèòðåêîâûé ðåêîðäåð Tascam 22 - 4 |
|
|
Âðåìÿ: 01.12.2013 04:33 |
---|---|---|---|---|
|
Ïðîäàì íîâûé ñòóäèéíûé ìóëüòèòðåêîâûé ðåêîðäåð Tascam 22 - 4 4 êàíàëà , ñêîðîñòè : 19 è 38 ñì/ñ . Îïèñàíèå : The Tascam Series 22-4 recorder/reproducer is a 4-track, 4-channel tape deck designed for professional type recording set-ups, in which mixers, master recorders, microphones, auxiliary signal processors, and other equipment are used in conjunction as a complete recording system. The 22-4 features a 4-track, 4-channel format to allow recording flexibility and creativity, and via its special SIMUL SYNC function, provides such professional recording capabilities as punch in recording, overdubbing, ping pong recording using a mixer, and the control and monitoring of individual tracks. Other special features such as selection of 15 ips and 7-1/2 ips with seven inch reels, independent controls for individual track recording and/or monitoring, expanded scale VU meters, manual cueing, three-motor, three-head design, variable pitch control, full remote-control capability, full IC logic control, built-in interface for optional dbx unit, and a memory-stop function provide complete professional-type multi-track recording capability in a cost-effective compact design. ÒÒÕ : Mechanical Tape: 1/4-inch tape width, 1 mil base Track format: 4 track, 4 channel Reel size: 7 inches max. Tape speed: 15 ips/7-1/2 ips ±0.5 % Pitch control: ±6% Wow and flutter 15 ips ±0.07 % peak (lEC/ANSI weighted) ±0.1 % peak (lEC/ANSI unweighted) 7-1/2 ips ±0.09 % peak (lEC/ANSI weighted) ±0.12% peak (lEC/ANSI unweighted) Fast wind time: 120 seconds for 1800 ft. Motors Capstan: FG-servo DC motor Reel Outer-rotor induction motor Head configuration: 3 heads: Erase, record and playback Electrical Line input Input impedance: 50k ohms, unbalanced Nominal input level: -10dBv (0.3 V) Minimum input level: -20dBv (0.1 V) Line output Output impedance: 1k ohm, unbalanced Minimum load impedance: 10k ohms or higher Nominal output level: -10dBv (0.3V) Maximum output level: 0dBv (1V) Headphones maximum output: 100 mW with 8-ohm stereo headphones Record level calibration: 0 VU is referenced to 1 kHz, 185 nWb/m Bias frequency: 100 kHz Total harmonic distortion 1% at 0VU, 1 kHz, 185nWb/m 3% at 10dB above 0 VU, 1 kHz, 585 nWb/m Signal to noise ratio At a reference of 1 kHz, 585 nWb/m 15 ips 61 dB A weighted (95 dB with dbx) 56 dB unweighted (85 dB with dbx) 7-1/2 ips 60 dB, A weighted (95 dB with dbx) 55 dB, unweighted (85 dB with dbx) Adjacent channel separation: 40 dB or more at 1 kHz Frequency response 7-1/2 ips: 40 Hz - 20 kHz ±3 dB at -10 VU 15 ips: 40 Hz-22 kHz ±3 dB at 0 VU Equalization ∞ + 35 /µsec. at 15 ips 3180 µsec. + 50 µsec, at 7-1/2 ips Sync response 7-1/2 ips: 40 Hz-6.3 kHz 15 ips: 50 Hz-8 kHz Erasure: 70 dB or more, referenced to 1 kHz +10 dB Headroom Record amplifier: Higher than 23 dB above 0 VU Playback amplifier: Higher than 23 dB above 0 VU Dimensions: 416x410x260 mm Power requirements: 220 V AC; 50 Hz; 70 W Weight: 18 kg Ïèøåò / âîñïðîèçâîäèò - ÿðêî , ìîùíî , äèíàìè÷íî . Ìîæíî èñïîëüçîâàòü äëÿ áûòîâîé , 4 - õ äîðîæå÷íîé çàïèñè , èëè - ïèñàòü ìàëûå ñîñòàâû . Ìîæíî ïîäêëþ÷èòü ñòóäèéíûé øóìîäàâ - äëÿ ýòîãî åñòü ñîîòâåòñòâóþùèå 8 ïàð RCA , êîòîðûå â îáû÷íîì ñîñòîÿíèè ñîåäèíåíû ïåðåìû÷êàìè . Òîâàð íàõîäèòñÿ â Óêðàèíå .  ÐÔ ìîãó îòïðàâèòü ïðîâîäíèêàìè ëèáî ëþáîé ýêñïðåññ ïî÷òîé . Öåíà : EUR 1000 . |
|